https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
®
FO converter with integrated optical diagnosis, for DeviceNet™, CAN, CANopen to 800 kbps, basic module,
interfaces: 1 x CAN, 1 x alarm, 1 x FO (FSMA), 660 nm, for polymer/HCS fiber cable
Product Features
Data rates of up to 800 kbps, set via DIP switches
Approved for use in zone 2
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Integrated optical diagnostics for continuous monitoring of fiber optic paths
High-quality electrical isolation between all interfaces (DeviceNet // fiber optic port // power supply // backplane)
Integrated bus termination resistor can be connected internally
Integrated backplane for routing through the supply voltage and data signals
Connections can be plugged in using a COMBICON screw terminal block
Floating switch contact in the basic module for leading alarm generation in relation to critical fiber optic paths
Key commercial data
Packing unit
1 pc
Weight per Piece (excluding packing)
173.3 GRM
Custom tariff number
85176200
Country of origin
Germany
Technical data
Note
Utilization restriction
EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width
22.5 mm
10/10/2014 Page 1 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Technical data
Dimensions
Height
99 mm
Depth
114.5 mm
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Permissible humidity (operation)
30 % ... 95 % (non-condensing)
Altitude
5000 m (For restrictions see manufacturer's declaration)
Degree of protection
IP20
Noise immunity
EN 61000-6-2:2005
Serial interface
Interface 1
CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN,
CANopen
Connection method
Pluggable screw connection
File format/coding
Bit stuffing, NRZ
Transmission medium
Copper
Transmission length
≤ 5000 m (Dependent on the data rate and the protocol used)
Termination resistor
120 Ω (Can be connected)
Serial transmission speed
≤ 800 kbps
Optical interface FO
Transmit capacity, minimum
-6.2 dBm (980/1000 µm)
-16.9 dBm (200/230 µm)
Minimum receiver sensitivity
-30.2 dBm
Wavelength
660 nm
Transmission length incl. 3 dB system reserve
100 m (With F-P 980/1000 230 dB/km with quick mounting connector)
800 m (With F-K 200/230 10 dB/km with quick mounting connector)
Transmission medium
Polymer fiber
HCS fiber
Connection method
F-SMA
Digital outputs
Output name
Relay output
Output description
Alarm output
Number of outputs
1
Maximum switching voltage
60 V DC
42 V AC
Limiting continuous current
0.46 A
10/10/2014 Page 2 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Technical data
Power supply
Supply voltage range
10 V DC ... 30 V DC (via pluggable COMBICON screw terminal block)
Max. current consumption
100 mA
Typical current consumption
100 mA (24 V DC)
Connection method
Pluggable COMBICON screw terminal block through basic module
General
Bit distortion, input
± 35 % (permitted)
Bit distortion, output
< 6.25 %
Electrical isolation
VCC // CAN
Test voltage data interface/power supply
1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibility
Conformance with EMC Directive 2004/108/EC
Noise emission
EN 55011
Housing material
PA 6.6-FR
Color
green
MTBF
409 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5
days a week, 8 hours a day))
82 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle
(5 days a week, 12 hours a day))
Conformance
CE-compliant
ATEX
II 3 G Ex nAC IIC T4 X (Please follow the special installation instructions
in the documentation!)
II (2) GD [Ex op is] IIC (PTB 06 ATEX 2042 U) (Please follow the special
installation instructions in the documentation!)
UL, USA / Canada
Class I, Zone 2, AEx nc IIC T5
Class I, Div. 2, Groups A, B, C, D
Classifications
eCl@ss
eCl@ss 4.0
27230207
eCl@ss 4.1
27230207
eCl@ss 5.0
27230207
eCl@ss 5.1
27230207
eCl@ss 6.0
27230207
eCl@ss 7.0
27230207
eCl@ss 8.0
27143136
ETIM
ETIM 2.0
EC001423
10/10/2014 Page 3 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Classifications
ETIM
ETIM 3.0
EC001423
ETIM 4.0
EC001423
ETIM 5.0
EC001423
UNSPSC
UNSPSC 6.01
30211506
UNSPSC 7.0901
39121008
UNSPSC 11
39121008
UNSPSC 12.01
39121008
UNSPSC 13.2
43201553
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
ATEX / UL Listed
Approvals submitted
Approval details
UL Recognized
cUL Recognized
cULus Recognized
10/10/2014 Page 4 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Accessories
Accessories
Adapter
Fiber optic coupling - PSM-SET-FSMA-LINK/2 - 2799416
Coupling; set consisting of 2 couplings for connecting F-SMA plugs
Assembly tool
Assembly tool - PSM-POF-KONFTOOL - 2744131
Polymer fiber DIY case, consisting of: Stripping knife, stripping pliers, polishing wheels for F-SMA and SCRJ quick
mounting connectors, polishing pad and emery paper
Assembly tool - PSM-HCS-KONFTOOL - 2799526
HCS assembly kit for F-SMA quick mounting connectors, including stripping blade, stripping pliers, aramide yarn
scissors, fiber stripper, microscope, fiber cleaving tool for standard HCS fibers, and documentation
Assembly tool - PSM-SET-FSMA-POLISH - 2799348
Polymer fiber polishing set, for F-SMA quick mounting connectors
Connector set
10/10/2014 Page 5 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Accessories
FO connectors - PSM-SET-FSMA/4-KT - 2799720
F-SMA plug set for polymer fiber, for self assembly consisting of 4 quick mounting connectors with bend protection
sleeve
FO connectors - PSM-SET-FSMA/4-HCS - 2799487
F-SMA plug set for HCS fiber, for self assembly consisting of 4 quick mounting connectors with bend protection sleeve
Data cable by the meter
FO cable - PSM-LWL-KDHEAVY-980/1000 - 2744319
Polymer fiber cable, duplex 980/1000 µm, medium-weight version for permanent indoor installation, by the meter, without
connector
FO cable - PSM-LWL-RUGGED-980/1000 - 2744322
Polymer fiber cable, duplex, 980 µm/1000 µm, heavy version for permanent indoor installation, sold by the meter without
connectors
FO cable - PSM-LWL-RUGGED-FLEX-980/1000 - 2744335
Polymer fiber cable, duplex 980/1000 µm, heavy-weight, highly flexible version for flexible conduit applications, by the
meter, without connector
10/10/2014 Page 6 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Accessories
FO cable - PSM-LWL-HCS-RUGGED-200/230 - 2799885
HCS cable, duplex 200/230 µm, by the meter, without connector, for indoor installation
FO cable - PSM-LWL-HCSO-200/230 - 2799445
HCS cable, duplex 200/230 µm, by the meter, without connector, for outdoor installation
Bus system cable - SAC-5P-920/... - 1511504
®
Cable ring for CANopen and DeviceNet™ cable, 5-pos., in cable lengths from 0.5 m to 400 m
Data plug
D-SUB bus connector - SUBCON-PLUS-CAN - 2744694
D-SUB connector, 9-pos. female connector, two cable entries < 35° to one terminal block row, bus system: CAN,
®
CANopen , SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7;
screw connection terminal blocks
D-SUB bus connector - SUBCON-PLUS-CAN/PG - 2708119
®
D-SUB connector, 9-pos. socket, cable entry < 35°, bus system: CAN, CANopen , SafetyBUS p up to 1 Mbps, with
PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin
assignment: 2, 3, 6, 7, 9; screw terminal blocks
10/10/2014 Page 7 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Accessories
D-SUB bus connector - SUBCON-PLUS-CAN/AX - 2306566
D-SUB connector, 9-pos. female connector, axial version with two cable entries, bus system: CAN, CANopen, SafetyBUS
p; pin assignment: 2, 3, 7; screw connection terminal blocks
D-SUB bus connector - SUBCON-PLUS-CAN/90/PG/M12 - 2902322
D-SUB plug, 9-pos., socket, with PG-D-SUB pin, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 90°.
Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.
D-SUB bus connector - SUBCON-PLUS-CAN/90/M12 - 2902323
D-SUB plug, 9-pos., socket, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 90°. Bus system: CAN,
CANopen®. Termination resistor via separate M12 terminator.
D-SUB bus connector - SUBCON-PLUS-CAN/35/PG/M12 - 2902324
D-SUB plug, 9-pos., socket, with PG-D-SUB pin, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 35°.
Bus system: CAN, CANopen®. Termination resistor via separate M12 terminator.
D-SUB bus connector - SUBCON-PLUS-CAN/35/M12 - 2902325
D-SUB plug, 9-pos., socket, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 35°. Bus system: CAN,
CANopen®. Termination resistor via separate M12 terminator.
10/10/2014 Page 8 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Accessories
D-SUB bus connector - SUBCON-PLUS-CAN/AX/M12 - 2902326
D-SUB plug, 9-pos., socket, assignment: 2, 3, 5, 6, 7, 9; two M12 cable glands (A-coded) under 180° (axial). Bus system:
CAN, CANopen®. Termination resistor via separate M12 terminator.
D-SUB bus connector - SUBCON-PLUS-CAN - 2744694
D-SUB connector, 9-pos. female connector, two cable entries < 35° to one terminal block row, bus system: CAN,
®
CANopen , SafetyBUS p up to 1 Mbps, termination resistor can be switched on via slide switch, pin assignment: 2, 3, 7;
screw connection terminal blocks
D-SUB bus connector - SUBCON-PLUS-CAN/PG - 2708119
®
D-SUB connector, 9-pos. socket, cable entry < 35°, bus system: CAN, CANopen , SafetyBUS p up to 1 Mbps, with
PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin
assignment: 2, 3, 6, 7, 9; screw terminal blocks
D-SUB bus connector - SUBCON-PLUS-CAN/AX - 2306566
D-SUB connector, 9-pos. female connector, axial version with two cable entries, bus system: CAN, CANopen, SafetyBUS
p; pin assignment: 2, 3, 7; screw connection terminal blocks
Measuring tools
Measuring instrument - PSM-FO-POWERMETER - 2799539
Fiber optic measuring case, consisting of an optical power meter, F-SMA, B-FOC adapters, reference fibers and
operating instructions
10/10/2014 Page 9 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Accessories
Screwdriver tools
Screwdriver - SZS 0,4X2,5 VDE - 1205037
Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
Drawings
Application drawing
Application drawing
FO
FO
BE
B
B
BE
B
FO
...64x
BE
B
Branch line / redundant branch line
...64x
...64x
Linear structure
Application drawing
Application drawing
max. 63
BE E E
BE BE
...20
BE
T
...20
T
...
FO
FO
B
B
B
B
max. 63
BE
Star structure / redundant star structure
BE
BE
T
T
max. 63
...
Tree structure
T
T
...
max. 63
T
T
...
max. 63
T
T
...
FO
10/10/2014 Page 10 / 11
https://www.phoenixcontact.com/us/products/2708054
FO converters - PSI-MOS-DNET CAN/FO 660/BM - 2708054
Catalog photo
Figure may contain other products.
Block diagram
*) Only in the basic module
Phoenix Contact 2014 © - all rights reserved
http://www.phoenixcontact.com
10/10/2014 Page 11 / 11